Wstat
-
Posts
11 -
Joined
-
Last visited
Content Type
Forums
Blogs
Gallery
Events
Learn About Weather and Meteorology
Community guides
Posts posted by Wstat
-
-
1 hour ago, 4wd said:
It's probably not worth spending anything on it, those were always budget stations would be lucky to get 2 or 3 years out of them.
Having said that a lot of the internal components are inexpensive off the shelf items and can be swapped out with moderate knowledge and basic tools, you might be able to make one good one out of two 'dead' ones acquired for peanuts or better free.I know it is budget one but I am not a "professional" and don't want expensive stations...
I can't see inside many components for swapping out regardless my good knowledge/skills of hardware.
Anyway I don't think I can find another one dead to make one working. Probably I will give up wasting time...
-
5 hours ago, jtay said:
Right, so the console works and is communicating with the PC, by the looks of it.
Now you need to get the station communicating with the console, then it should populate the other readings. So make sure the batteries in the station are new and that it's in range.
I tried connect all sensors and put batteries but no changes, it's the same as before...
-
1 hour ago, jtay said:
I've just tried it with Cumulus...It has changed a bit since the version that I had previously.
Steps to get it working...
I did everything as you described and Cumulus now shows everywhere zero except pressure 1170mb...
Command prompt keep saying "Error reading data from station- it may need resetting"
-
1 hour ago, Mapantz said:
You'll need to configure it to read your station via a com port; Settings -> Station Settings
Sorry it's too complicated for me...
In Device Manager had no Ports. I added them manually and appeared Communications Port (COM4) with yellow exclamation mark regardless of USB is in or out...
-
24 minutes ago, Mapantz said:
That's the CMX start up window. You need to access the web interface by putting http://127.0.0.1:8998 in to your web browser and hit enter. or http://localhost:8998
I managed to get Cumulus by entering http://127.0.0.1:8998 when CMX is opened (http://localhost:8998 doesn't work)
I thought it is program to install...anyway now I see Cumulus but nothing happens when plug in USB (sensors not connected to sender, no batteries in it)
Jtay said Just fire it up, plug in the usb and from memory, see if the comms indicators flicker.
Which memory, indicators...?
Sorry I lost idea what to do with Cumulus...
-
1 hour ago, jtay said:
Cumulus mx can be downloaded here
Software - Cumulus Wiki
CUMULUSWIKI.WXFORUM.NETIt runs on Windows. Just fire it up, plug in the usb and from memory, see if the comms indicators flicker.
Sorry I even couldn't install Cumulus...It stops here:
-
Thank you guys but I am not good with that matter, even don't know what is Cumulus, Pi...Have no time to learn all that from scratch...
On the other hand, don't want to involve PC in that game...
Obviously the stuff is too old as you mentioned and probably I couldn't find used working console...
-
8 minutes ago, Mandrake said:
It wont be visible as a USB device to the PC.
You need the software to talk via the USB to see the console data.
You can use the Easyweather software as mentioned or something like Cumulus which is what I used to use on my old Maplin N96Y before I retired it.
I will find/try Easyweather and what to expect- to use it instead console display or can update firmware to revive console?
-
Thanks Mandrake,
No, I didn't pay so much, just wanted to see how it's working...
When connect it via USB cable, PC installed drivers but I can't see it in W. Explorer or somewhere in Device manager, just known sound when plug in/out.
I've got electronics background, oscilloscope, but don't know what to check if open it...
-
Hi all,
I bought new in box Maplin Weather station N96GY (WH1081) from car boot sell. Unfortunately console display doesn't work...When I put the batteries in, all digit segments and LEDs come on for a 1-2 sec (like initial test) and everything disappear, screen is clear, nothing on it.
My questions are:
1. Is that common known problem?
2. Is it hardware or software problem?
3. Generally is it possible to update the firmware?
Any solution please?
Thanks
Maplin Weather station N96GY (WH1081) display not working
in Weather stations and equipment
Posted
Yes I know good WS are £100+ but I am still not so keen to invest... I didn't look to buy WS, just saw this one accidentally .
Thanks everybody who tried to help me!